Joseph Stokes
Prof
![Profile Photo](https://dcu.ie/sites/default/files/staff/2022-05/dean-of-gso-revised-photo_0_0.jpg)
Professor Joseph Stokes, is currently the Dublin City University Dean of Graduate Studies, with responsibility for strategy, policy and regulation relating to graduate research in the University, and for providing support to DCU's doctoral and research master's students and their supervisors. Prof Stokes leads the Graduate Studies Office, and chairs the DCU Graduate Research Studies Board. He is a member of the Irish Universities Association (IUA) Deans of Graduate Studies group, and is a regular contributor to meetings of the European Universities Association Council for Doctoral Education (EUA- CDE).
He was awarded the degrees of B.A. and B.A.I. in Mechanical and Manufacturing Engineering from Trinity College Dublin in 1997 and began his PhD studies that year in DCU. He attained his PhD in Mechanical and Manufacturing Engineering from Dublin City University in 2002, graduated March 2003. He lectured part-time for two years in Dublin Institute of Technology Bolton Street from 1998 to 2000. In September 2000 he became a permanent member of the academic staff in the School of Mechanical and Manufacturing Engineering in Dublin City University. He was promoted to his current position in DCU in 2009.
From 2012 to 2017, he was Head of School of Mechanical and Manufacturing Engineering in Dublin City University.
He is an Associate Professor in Surface Engineering and Tribological Coatings, research active in this area since 1997. His professional achievement includes the production of coated and free-standing engineering components using the HVOF (High Velocity Oxy-Fuel) process, other processes include Atmospheric Plasma and Flame Thermal Spray (Thermal Spray facilities), including Tribological Assessment. Applications of his research include: Wear Reduction, Bio-coatings for Implant Replacement Therapy, Oil and Gas Protective Coatings, Bio-Energy areas like Anaerobic Digestion and Fuel Cells coated components and applications to mention a few. He is an active member of the Centre for Medical Engineering Research (MEDEng) and the National Centre for Plasma Science and Technology (NCPST).
He was awarded the degrees of B.A. and B.A.I. in Mechanical and Manufacturing Engineering from Trinity College Dublin in 1997 and began his PhD studies that year in DCU. He attained his PhD in Mechanical and Manufacturing Engineering from Dublin City University in 2002, graduated March 2003. He lectured part-time for two years in Dublin Institute of Technology Bolton Street from 1998 to 2000. In September 2000 he became a permanent member of the academic staff in the School of Mechanical and Manufacturing Engineering in Dublin City University. He was promoted to his current position in DCU in 2009.
From 2012 to 2017, he was Head of School of Mechanical and Manufacturing Engineering in Dublin City University.
He is an Associate Professor in Surface Engineering and Tribological Coatings, research active in this area since 1997. His professional achievement includes the production of coated and free-standing engineering components using the HVOF (High Velocity Oxy-Fuel) process, other processes include Atmospheric Plasma and Flame Thermal Spray (Thermal Spray facilities), including Tribological Assessment. Applications of his research include: Wear Reduction, Bio-coatings for Implant Replacement Therapy, Oil and Gas Protective Coatings, Bio-Energy areas like Anaerobic Digestion and Fuel Cells coated components and applications to mention a few. He is an active member of the Centre for Medical Engineering Research (MEDEng) and the National Centre for Plasma Science and Technology (NCPST).
Book Chapter
Peer Reviewed Journal
Year | Publication | |
---|---|---|
2017 | Baroutaji, A;Carton, JG;Oladoye, AM;Stokes, J;Twomey, B;Olabi, AG (2017) 'Ex-situ evaluation of PTFE coated metals in a proton exchange membrane fuel cell environment'. Surface and Coatings Technology, 323 :10-17. [DOI] | |
2017 | Montingelli, ME;Benyounis, KY;Quilty, B;Stokes, J;Olabi, AG (2017) 'Influence of mechanical pretreatment and organic concentration of Irish brown seaweed for methane production'. Energy, 118 :1079-1089. [DOI] | |
2017 | Levingstone, TJ;Barron, N;Ardhaoui, M;Benyounis, K;Looney, L;Stokes, J (2017) 'Application of response surface methodology in the design of functionally graded plasma sprayed hydroxyapatite coatings'. Surface and Coatings Technology, 313 :307-318. [DOI] | |
2017 | Tedesco, S;Stokes, J (2017) 'Valorisation to biogas of macroalgal waste streams: a circular approach to bioproducts and bioenergy in Ireland'. Chemical Papers, 71 :721-728. [DOI] | |
2013 | Paşcu E.;Stokes J.;McGuinness G. (2013) 'Electrospun composites of PHBV, silk fibroin and nano-hydroxyapatite for bone tissue engineering'. Materials Science and Engineering C, 33 (8):4905-4916. [DOI] | |
2012 | Islak S.;Buytoz S.;Ersoz E.;Orhan N.;Stokes J.;Hashmi M.;Somunkiran I.;Tosun N. (2012) 'Effect on microstructure of TiO2 rate in Al2O3-TiO2 composite coating produced using plasma spray method'. Optoelectronics and Advanced Materials, Rapid Communications, 6 (9-10):844-849. | |
2010 | Abubakar T.;Rahman M.;Dowling D.;Stokes J.;Hashmi M. (2010) 'Adhesion performance of TiN coating with amorphous NiTi alloy interlayer onto 316L stainless biosteel deposited by sputtering process'. Surface Engineering, 26 (7):499-505. [DOI] | |
2015 | Levingstone T.;Ardhaoui M.;Benyounis K.;Looney L.;Stokes J. (2015) 'Plasma sprayed hydroxyapatite coatings: Understanding process relationships using design of experiment analysis'. Surface and Coatings Technology, 283 :29-36. [DOI] | |
2015 | Ekpeni L.;Benyounis K.;Nkem-Ekpeni F.;Stokes J.;Olabi A. (2015) 'Underlying factors to consider in improving energy yield from biomass source through yeast use on high-pressure homogenizer (hph)'. Energy, 81 :74-83. [DOI] | |
2015 | Al-Mutairi S.;Hashmi M.;Yilbas B.;Stokes J. (2015) 'Microstructural characterization of HVOF/plasma thermal spray of micro/nano WC-12%Co powders'. Surface and Coatings Technology, 264 :175-186. [DOI] | |
2012 | Murtaza Q.;Stokes J.;Ardhaoui M. (2012) 'Computational fluid dynamics analysis of the production of bio-thermal spray Hydroxyapatite powders'. International Journal of Computational Materials Science and Surface Engineering, 5 (1):31-54. [DOI] | |
2011 | Kehoe S.;Stokes J. (2011) 'Box-Behnken design of experiments investigation of hydroxyapatite synthesis for orthopedic applications'. Journal of Materials Engineering and Performance, 20 (2):306-316. [DOI] | |
2009 | Hasan, M;Stokes, J;Looney, L;Hashmi, MSJ (2009) 'Deposition and Characterization of HVOF Thermal Sprayed Functionally Graded Coatings Deposited onto a Lightweight Material'. Journal of Materials Engineering and Performance, 18 :66-69. [DOI] | |
2006 | Al-Fadhli, HY;Stokes, J;Hashmi, MSJ;Yilbas, BS (2006) 'The erosion-corrosion behaviour of high velocity oxy-fuel (HVOF) thermally sprayed inconel-625 coatings on different metallic surfaces'. Surface and Coatings Technology, 200 :5782-5788. [DOI] | |
2009 | Stokes, J;Looney, L (2009) 'FEA of Residual Stress During HVOF Thermal Spraying'. Journal of Materials Engineering and Performance, 18 :21-25. [DOI] | |
2006 | Al-Fadhli, HY;Stokes, J;Hashmi, MSJ;Yibas, BS (2006) 'HVOF coating of welded surfaces: Fatigue and corrosion behaviour of stainless steel coated with Inconel-625 alloy'. Surface and Coatings Technology, 200 :4904-4908. [DOI] | |
2001 | Stokes, J;Looney, L (2001) 'HVOF system definition to maximise the thickness of formed components'. Surface and Coatings Technology, 148 :18-24. | |
2012 | Garcia-Alonso, D;Parco, M;Stokes, J;Looney, L (2012) 'Low-Energy Plasma Spray (LEPS) Deposition of Hydroxyapatite/Poly-epsilon-Caprolactone Biocomposite Coatings'. Journal of Thermal Spray Technology, 21 :132-143. [DOI] | |
2016 | Paşcu E.;Cahill P.;Stokes J.;McGuinness G. (2016) 'Towards functional 3D-stacked electrospun composite scaffolds of PHBV, silk fibroin and nanohydroxyapatite: Mechanical properties and surface osteogenic differentiation'. Journal of Biomaterials Applications, 30 (9):1334-1339. [DOI] | |
2009 | Mulligan P.;Smith J.;Stokes J. (2009) 'Development of a cold flow deposition process for the application of coatings using the HVOF spray process'. Arabian Journal for Science and Engineering, 34 (1 C):89-98. | |
2008 | Hasan M.;Stokes J.;Looney L.;Hashmi M. (2008) 'Design and optimisation of a multi-powder feed system for the HVOF deposition process'. Surface and Coatings Technology, 202 (14):3215-3220. [DOI] | |
2008 | Hasan M.;Stokes J.;Looney L.;Hashmi M. (2008) 'Effect of spray parameters on residual stress build-up of HVOF sprayed aluminium/tool-steel functionally graded coatings'. Surface and Coatings Technology, 202 (16):4006-4010. [DOI] | |
2016 | Oladoye A.;Carton J.;Benyounis K.;Stokes J.;Olabi A. (2016) 'Optimisation of pack chromised stainless steel for proton exchange membrane fuel cells bipolar plates using response surface methodology'. Surface and Coatings Technology, 304 :384-392. [DOI] | |
2015 | Ekpeni L.;Benyounis K.;Stokes J.;Olabi A. (2015) 'Improving and optimizing protein concentration yield from homogenized baker's yeast at different ratios of buffer solution'. International Journal of Hydrogen Energy, . [DOI] | |
2016 | Montingelli M.;Benyounis K.;Quilty B.;Stokes J.;Olabi A. (2016) 'Optimisation of biogas production from the macroalgae Laminaria sp. at different periods of harvesting in Ireland'. Applied Energy, 177 :671-682. [DOI] | |
2016 | Montingelli M.;Benyounis K.;Stokes J.;Olabi A. (2016) 'Pretreatment of macroalgal biomass for biogas production'. Energy Conversion and Management, 108 :202-209. [DOI] | |
2013 | T. Abubakar, M. Rahman, and J. Stokes, (2013) 'Effect of Annealing Treatment on the Wear Properties of Ni Rich NiTi Alloy Coatings'. 686 :192-200. | |
2013 | S. Al-Mutairi, M.S.J. Hashmi, B.S. Yilbas, J. Stokes, (2013) 'Microstructural Characterization of HVOF/Plasma Thermal Spray of Micro/Nano WC-12%Co Blended with AMDRY 995M/9954 Powders'. Surface and Coatings Technology, . | |
2012 | A. Chebbi, J., Stokes (2012) 'Thermal Spraying of Bioactive Polymer Coatings for Orthopaedic Applications'. Journal of Thermal Spray Technology, 21 :719-730. | |
2012 | D. Garcia-Alonso, M. Parco, J. Stokes, L. Looney, (2012) 'Statistical design of experiment of low energy plasma spray deposition of hydroxyapatite/poly-e-caprolactone biocomposite coatings'. Journal of Thermal Spray Technology, 21 :132-143. | |
2012 | Q. Murtaza, M. Ardhaoui, J. Stokes, (2012) 'Experimental Analysis of Spray Dryer used in Hydroxyapatite Thermal Spray Powder'. Journal of Thermal Spray Technology, 21 :963-974. | |
2011 | S. Hasan, J. Stokes (2011) 'Design of Experiment Analysis of the Sulzer Metco DJ High Velocity Oxy-Fuel Coating of Hydroxyapatite for Orthopaedic Applications'. Journal of Thermal Spray Technology, 20 :186-194. | |
2010 | T.A. Abubakar, M. Rahman, D. P. Dowling, J. Stokes and M.S.J.Hashmi (2010) 'Structure and Mechanical Properties of Post-Sputtering Annealing Ni rich NiTi Coating¸'. Surface and Coatings Technology, . | |
2010 | T.A. Abubakar, M. Rahman, D. P. Dowling, J. Stokes and M.S.J.Hashmi (2010) 'The Role of Oxide Surface on Adhesion and Wear Resistance of Ni rich Nickel Titanium Coating¸'. Surface and Coatings Technology, . | |
2010 | T.A. Abubakar, M. Rahman, D.P. Dowling, M.S.J. Hashmi, J. Stokes (2010) 'Mechanical Performance of the Annealed NiTi Shape Memory Alloy Coating onto 316L Stainless Bio-Steel, Diffusion in Solids and Liquids – Periodical of Defect and Diffusion Forum'. 297-301 :365-369. | |
2008 | J. Stokes, L. Looney, (2008) 'Predicting Quenching and Cooling Stresses within HVOF Deposits'. Journal of Thermal Spray Technology, 17 :908-914. | |
2004 | Stokes, J. and Looney, L. (2004) 'Residual Stress in HVOF Thermally Sprayed Thick Deposits'. Surface and Coatings Technology, 177-178 :18-23. |
Conference Publication
Year | Publication | |
---|---|---|
2016 | Aldosari M.;Benyounis K.;Stokes J. (2016) Proceedings of the International Thermal Spray Conference Implementing the equation of state to account for the density variation at the inlet boundaries for high velocity oxy gas fuel process | |
2017 | Baroutaji, A;Carton, JG;Stokes, J;Olabi, AG (2017) INTERNATIONAL JOURNAL OF HYDROGEN ENERGY Application of Open Pore Cellular Foam for air breathing PEM fuel cell [DOI] | |
2017 | Gunes, B., Benyounis, K., Stokes, J., Davis, P., Connolly, C., Lawler, J. (2017) European Biomass Conference and Exhibition (EUBCE) Effects Of Alkaline And Beating Pretreatment On Anaerobic Digestion Of Distillery Co-Products [Link] | |
2006 | Levingstone, T.J.; Stokes, J.; L. Looney, L.; (2006) International Thermal Spray Conference Investigation of Plasma Sprayed Hydroxyapatite Coatings Seattle, WA, USA, | |
2006 | Levingstone, T.J.; Stokes, J.; Looney, L. (2006) 20th European Conference on Biomaterials Optimisation of Plasma Sprayed Hydroxyapatite Coatings Nantes, France, | |
2006 | Levingstone, T.J.; Stokes, J.; Looney, L (2006) 12th Annual Conference of the Section of Bioengineering of the Royal Academy of Medicine in Ireland Investigation of the influence of plasma spray process parameters on Hydroxyapatite Coatings Galway, Ireland, | |
2013 | Abubakar, T;Rahman, M;Stokes, J (2013) GREEN TECHNOLOGIES FOR SUSTAINABLE & INNOVATION IN MATERIALS Effect of Annealing Treatment on the Wear Properties of Ni Rich NiTi Alloy Coatings [DOI] | |
2012 | Chebbi A.;Stokes J. (2012) Journal of Thermal Spray Technology Thermal spraying of bioactive polymer coatings for orthopaedic applications [DOI] | |
2013 | Abubakar T.;Rahman M.;Stokes J. (2013) Advanced Materials Research Effect of annealing treatment on the wear properties of Ni rich NiTi alloy coatings [DOI] | |
2011 | Kehoe S.;Ardhaoui M.;Stokes J. (2011) Journal of Materials Engineering and Performance Design of experiments study of hydroxyapatite synthesis for orthopaedic application using fractional factorial design [DOI] | |
2012 | Chebbi A.;Stokes J. (2012) Proceedings of the International Thermal Spray Conference Design of experiments analysis of flame sprayed PCL/PMMA bioactive coatings | |
2014 | Ekpeni L.;Benyounis K.;Nkem-Ekpeni F.;Stokes J.;Olabi A. (2014) Energy Procedia Energy diversity through Renewable Energy Source (RES) - A case study of biomass [DOI] | |
2013 | Al-Hamed A.;Al-Fadhli H.;Al-Mutairi S.;Yilbas B.;Hashmi M.;Stokes J. (2013) WIT Transactions on Engineering Sciences Investigation of HVOF thermal sprayed nanostructured WC-12Co mixed with Inconel-625 coatings for oil/gas applications [DOI] | |
2014 | Ekpeni L.;Nkem-Ekpeni F.;Benyounis K.;Aboderheeba A.;Stokes J.;Olabi A. (2014) Energy Procedia Yeast: A potential biomass substrate for the production of cleaner energy (Biogas) [DOI] | |
2011 | Hasan S.;Stokes J. (2011) Journal of Thermal Spray Technology Design of experiment analysis of the Sulzer Metco DJ high velocity oxy-fuel coating of hydroxyapatite for orthopedic applications [DOI] | |
2011 | Pascu E.;Mcguinness G.;Stokes J. (2011) 24th European Conference on Biomaterials - Annual Conference of the European Society for Biomaterials Manufacturing and characterization of biodegradable electrospun tri-phasic nanocomposites | |
2011 | Podporska J.;Quilty B.;Devery R.;Stokes J. (2011) 24th European Conference on Biomaterials - Annual Conference of the European Society for Biomaterials Thermal sprayed hydroxyapatite-silver coatings with antimicrobial properties | |
2011 | Chebbi A.;Stokes J. (2011) 24th European Conference on Biomaterials - Annual Conference of the European Society for Biomaterials Design of experiments analysis of thermally sprayed PCL/PMMA coatings | |
2010 | Abubakar, T;Rahman, M;Dowling, DP;Stokes, J;Hashmi, MSJ (2010) DIFFUSION IN SOLIDS AND LIQUIDS V, PTS 1 AND 2 Mechanical Performance of the Annealed NiTi Shape Memory Alloy Coating onto 316L Stainless Bio-Steel [DOI] | |
2008 | Stokes, J;Looney, L (2008) JOURNAL OF THERMAL SPRAY TECHNOLOGY Predicting Quenching and Cooling Stresses within HVOF Deposits [DOI] | |
2009 | Mulligan, P;Smith, J;Stokes, J (2009) ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING DEVELOPMENT OF A COLD FLOW DEPOSITION PROCESS FOR THE APPLICATION OF COATINGS USING THE HVOF SPRAY PROCESS | |
2004 | Stokes, J;Looney, L (2004) SURFACE & COATINGS TECHNOLOGY Residual stress in HVOF thermally sprayed thick deposits [DOI] | |
2009 | Garcia-Alonso, D;Levingstone, T;Parco, M;Stokes, J (2009) BIOCERAMICS 21 Plasma Spray of Free-standing Components for Bone Tissue Engineering | |
2009 | Pascu, EI;Prescott, T;Stokes, J (2009) 2009 35TH ANNUAL NORTHEAST BIOENGINEERING CONFERENCE Study on Polycaprolactone/Hydroxylapatite Gradient Scaffolds for Tissue Engineering | |
2010 | Abubakar T.;Rahman M.;Dowling D.;Stokes J.;Hashmi M. (2010) Defect and Diffusion Forum Mechanical performance of the annealed NiTi Shape Memory Alloy coating onto 316L stainless bio-steel [DOI] | |
2009 | Pascu E.;Prescott T.;Stokes J. (2009) Bioengineering, Proceedings of the Northeast Conference Study on polycaprolactone/hydroxylapatite gradient scaffolds for tissue engineering [DOI] | |
2015 | Al-Hamed A.;Benyounis K.;Hashmi M.;Stokes J.;Al-Fadhli H.;Yilbas B. (2015) Proceedings of the International Thermal Spray Conference Design of experiment for advanced nanostructured WC-12Co coating HVOF: Dry solid particle erosion tests | |
2014 | Ekpeni, LEN;Nkem-Ekpeni, FF;Benyounis, KY;Aboderheeba, AKM;Stokes, J;Olabi, AG (2014) INTERNATIONAL CONFERENCE ON APPLIED ENERGY, ICAE2014 Yeast: A Potential Biomass Substrate for the Production of Cleaner Energy (Biogas) [DOI] | |
2014 | Ekpeni, LEN;Benyounis, KY;Nkem-Ekpeni, F;Stokes, J;Olabi, AG (2014) INTERNATIONAL CONFERENCE ON APPLIED ENERGY, ICAE2014 Energy Diversity through Renewable Energy Source (RES) - A Case Study of Biomass [DOI] |
Conference Contribution
Review Articles
Year | Publication | |
---|---|---|
2012 | Garcia-Alonso D.;Parco M.;Stokes J.;Looney L. (2012) Low-energy plasma spray (LEPS) deposition of hydroxyapatite/poly-ε- caprolactone biocomposite coatings. REV [DOI] | |
2012 | Murtaza Q.;Stokes J.;Ardhaoui M. (2012) Experimental analysis of spray dryer used in hydroxyapatite thermal spray powder. REV [DOI] |
Certain data included herein are derived from the © Web of Science (2022) of Clarivate. All rights reserved.
Research Interests
Thermal Spraying
Surface Engineering
Powder Processing and Characterisation
Finite Element Analysis and Design
Manufacturing Processes