Back to Search

Saleem Hashmi

Prof

Profile Photo

Book

Year Publication
2014 Hashmi S. (2014) Comprehensive Materials Processing.
2011 M.S.J. Hashmi, S. Mridha and S. Naher, Eds. (2011) Advances in Materials and Processing Technologies II, Advances in Materials Research, 2011 Part II. : Volumes 264 – 265.
2010 M.S.J. Hashmi, B.S. Yilbas and S. Naher (2010) Advances in Materials Processing and Technologies, Advanced Materials Research, Part 1,Selected papers from the Advances in Materials Processing Technologies Conference 2008. : 83-84, Trans Tech Publisher, Springer.
2010 M.S.J. Hahsmi, B.S. Yilbas and S. Naher (2010) Advances in Materials Processing and Technologies, Advanced Materials Research, Part 2, Volume 85-86, 2010, Selected papers from the Advances in Materials Processing Technologies Conference 2008. : Trans Tech Publisher, Springer.

Conference Contribution

Year Publication
2011 Albara Askandarani, Hashmi M.S.J. and Bekir Yilbas (2011) 14th International Conferences on Advances in Materials and Manufacturing Technologies 2011 ARC spraying of nanostructured wires on steel surfaces: Influence of coating thickness on microstructure and fracture toughness Hilton Hotel Convention Centre, Istanbul, Turkey, 13/09/2011-16/09/2011.
2011 Abdul Aleem B Jabbar, Hashmi MSJ and Yilbas Bekir Sami, (2011) 14th International Conferences on Advances in Materials and Manufacturing Technologies 2011 Laser Surface controlled melting of pre-prepared Inconel 718 alloy surface Hilton Hotel Convention Centre, Istanbul, Turkey, 13/09/2011-16/09/2011.
2011 Yasser Alshehri, Hashmi M.S.J., Yilbas B.S. (2011) 14th International Conferences on Advances in Materials and Manufacturing Technologies 2011 HVOF Coating of metallic surfaces using different powders: fracture toughness measurement of resulting surfaces Hilton Hotel Convention Centre, Istanbul, Turkey, 13/09/2011-16/09/2011.
.
2010 Y.A. Al-Shehri, M.S.J. Hashmi and B.S. Yilbas (2010) 13th International Conferences on Advances in Materials and Manufacturing Technologies 2010 HVOF coating of diamalloy 2002 and diamalloy 4010 onto steel: tensile and three point bending response of coatings Paris, France, 24/10/2010-27/10/2010.
2010 M. Aly,M. Messeiry, E.F.Abadir, A. I. Hussain, A.G. Olabi and M.S.J. Hashmi (2010) 13th International Conferences on Advances in Materials and Manufacturing Technologies 2010 Durability of waste glass flax fiber reinforced mortar Paris, France, 24/09/2010-27/09/2010.
2010 M.C.Kelleher and M.S.J. Hashmi (2010) 13th International Conferences on Advances in Materials and Manufacturing Technologies 2010 Effect on the processing characteristics of zno varistors produced using vibratory milling route Paris, France, 24/10/2010-27/10/2010.
2010 Al Askandarani, M.S.J. Hashmi and B.S. Yilbas (2010) 13th International Conferences on Advances in Materials and Manufacturing Technologies 2010 Plasma arc sparying of nano-particles blended wires onto steel surface: metallurgical examinations Paris, France, 24/09/2010-27/09/2010.
2010 Julfikar Haider and M S J Hashmi (2010) 13th International Conferences on Advances in Materials and Manufacturing Technologies 2010 New generation of MoSx based solid lubricant coatings: recent developments and applications Paris, France, 24/10/2010-27/10/2010.
2009 Julfikar Haider and M.S.J. Hashmi (2009) 11th International Conference in Materials Processing and Technologies Improving the deposition rate of multicomponent coating by controlling substrate table rotation in a magnetron sputtering processes Manama, Bahrain, 02/11/2009-05/11/2009.
2009 Al Askandarani, M.S.J. Hashmi and B.S. Yilbas (2009) 12th International Conference in Materials Processing and Technologies COATING PRODUCED BY DEPOSITION OF NANOPARTICLES BLENDED WIRES Legend Hotel, Kuala Lumpur, Malaysia, 26/09/2009-29/09/2009.
2009 O. Al-Mana, M.S.J. Hashmi and B.S. Yilbas (2009) 12th International Conference in Materials Processing and Technologies LASER GAS ASSISTED NITRIDING AND TiN COATING OF Ti-6Al-4V ALLOY Legend Hotel, Kuala Lumpur, Malaysia, 26/10/2009-29/10/2009.
2009 Y.A. Al-Shehri, M.S.J. Hashmi B.S. Yilbas, (2009) 12th International Conference in Materials Processing and Technologies HVOF COATING OF DIAMALLOY 2002 AND 4010 ON CARBON STEEL SHEETS: MICROSTRUCTURE EXAMINATION Legend Hotel, Kuala Lumpur, Malaysia, 26/10/2009-29/10/2009.
2009 Z.Y. Al-Taha, M.S.J. Hashmi and B.S.Y. Yilbas (2009) 12 th International Conference in Materials Processing and Technologies HVOF COATING OF INCONEL 625 BLENDED WITH WC: FRACTURE TOUGHNESS MEASUREMENT Legend Hotel, Kuala Lumpur, Malaysia, 26/09/2009-29/09/2009.
2008 Md.K. Al-Mamun, J. Stokes, M.S.J Hashmi, (2008) International Thermal Spray Conference ITSC 2008: Crossing Borders Designing of an Integrated Semi Automated Powder Feed Device to Produce Functionally Graded Materials (FGM) using the HVOF Thermal Spray Process Maastricht, The Netherlands, 02/06/2008-04/06/2008.
2007 Md.K. Al-Mamun, J. Stokes, M.S.J Hashmi, (2007) SURFENG 2007, Surface Engineering Conference & Exposition Workshop 2007 Production of Functionally Graded Materials Using the HVOF Thermal Spray Process Dublin, Ireland, 06/09/2007-07/09/2007.
2007 Md.K. Al-Mamun, J. Stokes, M.S.J Hashmi, (2007) International Manufacturing Conference Designing and Integrating a semi automated Powder Feed Device to Produce Functionally Graded Materials (FGM) using the HVOF Thermal Spray Process Waterford, Ireland, 08/08/2007-08/08/2007.
2007 Julfikar Haider, Mahfujur Rahman, M. S. J. Hashmi and Mohammed Sarwar, coating. (2007) 2nd International Conference on Surfaces, Coatings and Nanostructured Materials (NanoSmat 2007) Wear behaviour of low temperature plasma nitrided surface and hard-solid lubricant Algarve, Portugal, 07/07/2007-07/07/2007.
2007 M.I. Shahidul, M.S.J. Hashmi., (2007) Conference paper, Islamic development Bank, 2007 A Matrix of Zakat- Entrepreneurship-Technology for Marginal Poor: Few Case Studies in Bangladesh Economy Dhaka-Bangladesh, 07/07/2007-07/07/2007.
2006 Yilbas B.S. and Hashmi M.S.J. (2006) International Conference on Advances in Material Processing Technology Laser nitriding of Ti-6Al-4V alloy”, Conference on Advances in Material Processing Technology Las Vegas, USA, 30/07/2006-02/08/2006.
2006 Jamel Othman and MSJ Hashmi (2006) Proceeding of The International Conference On Science & Technology (ICSTIE06) The implementation of Advanced Manufacturing Technologies and Computer Integrated Manufacturing in Malaysian Manufacturing Industries UiTM Penang, Malaysia, 08/12/2006-09/12/2006.
2006 H.Y. Al-Fadhli, J. Stokes, M.S.J Hashmi and B.S. Yilbas (2006) 11th Middle East Corrosion Conference Modelling of HVOF Coating Deposit Applied over Different Metallic Surfaces and Tested in Highly Corrosive Environments 26/02/2006-01/03/2006.
2006 Mustafa A., Hashmi M.S.J., Yilbas B.S. and Sunar M. (2006) International Conferences on Advances in Material Processing Technology Thermal Stress Analysis in Annular Duct Resembling Gas Turbine Transition Piece: Effect of Mass Flow Rate Variation Las Vegas, USA, 30/07/2006-02/08/2006.
2006 Al-Anazi, Hashmi M.S.J., Yilbas B.S. and Sunar M. (2006) International Conferences on Advances in Material Processing Technology HVOF Sprayed AMDRY 995 Powders onto Ti-6 Al-4 V Alloy:Tensile Properties Las Vegas, USA, 30/07/2006-02/08/2006.
2006 Q. Murtaza, M. Ardhaoui, M.S.J Hashmi and J. Stokes (2006) International Conference on Materials-Energy-Design Computation Fluid Dynamic Analysis of the Production of Bio-Thermal Spray Powders 15/03/2006-16/03/2006.

Peer Reviewed Journal

Year Publication
2012 Hasan M, Stokes J, Looney L and Hashmi MSJ (2012) 'Deposition and Characterization of HVOF Thermal Sprayed Functionally Graded Coatings Deposited onto a Lightweight Material'. Journal of Materials Engineering and Performance, 18 :66-69.
2011 Aly,M.; Hashmi, M.S.J.; Olabi,A.G.; Messeiry,M.; Hussain, A.I. (2011) 'Effect of nano clay particles on mechanical, thermal and physical behaviours of waste-glass cement mortars'. MATERIALS SCIENCE AND ENGINEERING A, .
2011 Abdul Aleem,B.J.; Hashmi,M.S.J.; Yilbas,B.S. (2011) 'Laser surface treatment of high-speed steel: Presence of TiC particles at the surface'. Surf.Interface Anal., 2011 .
2011 Al-Mana,O.; Hashmi,M.S.J.; Yilbas,B.S. (2011) 'Laser gas assisted nitriding and TiN coating of Ti-6Al-4V alloy, Advanced Materials Research'. 264-265 :421-426.
2011 Abdul Aleem,B.J.; Hashmi,M.S.J. and Yilbas,B.S. (2011) 'Laser controlled melting of pre-prepared inconel 718 alloy surface'. Optics and Lasers in Engineering, 49 :1314-1319.
2011 Al-Taha,Z.Y.; Hashmi,M.S.J.; Yilbas,B.S.Y. , (2011) 'HVOF coating of Inconel 625 blended with WC: Fracture toughness measurement'. 264-265 :1972-1981.
2011 Al Askandarani, A.; Hashmi,M.S.J.; Yilbas,B.S (2011) 'Coating produced by deposition of nanoparticles blended wires'. 264-265 :1476-1481.
2011 Morshed,M.M.; Daniels,S.M.; Hashmi,M.S.J., (2011) 'Finite element method for predicting the cohesive strength of DLC film on 316L stainless steel by four point bend test and validation with experimental results'. 264-265 :1823-1831.
2010 Abubakar,T.; Rahman,M.; Dowling,D.P.; Stokes,J. and Hashmi,M.S.J. (2010) 'Mechanical performance of the annealed NiTi Shape Memory Alloy coating onto 316L stainless bio-steel'. Defect and Diffusion Forum, 297-301 :365-369.
2010 J. Haider and M.S.J. Hashmi (2010) 'Improving the deposition rate of multicomponent coating by controlling substrate table rotation in a magnetron sputtering process'. 83-86 :977-984.
2010 Al Askandarani,A.; Hashmi,M.S.J.; Yilbas,B.S. (2010) 'ARC Spraying of nano-structured wire on carbon steel: Examination of coating microstructures'. :1383-1388.
2010 Al-Shehri,Y.A.; Hashmi, M.S.J.; Yilbas, B.S. (2010) 'HVOF coatings of diamalloy 2002 and diamalloy 4010 onto steel: Tensile and bending response of coatings'. 1315 :1347-1352.
2010 Aly,M.; Hashmi,M.S.J.; Olabi,A.G.; Messeiry,M., (2010) 'Durability of waste glass flax fiber reinforced mortar'. 1315 :241-246.
2010 Hashmi, MSJ (2010) 'Characterization and Performance Evaluation of Zinc Oxide Varistor Blocks Processed by Latex Binders '. Journal of the American Ceramic Society, .
2010 Hasan M, Stokes J, Looney L, et al (2010) 'Deposition and Characterization of HVOF Thermal Sprayed Functionally Graded Coatings Deposited onto a Lightweight Material'. Journal of Materials Engineering and Performance, 18 :66-69.
2010 M. Aly, M.S.J. Hashmi, A.G. Olabi, M. Messeiry, E.F. Abadir and A.I. Hussain (2010) 'Effect of colloidal nano-silica on the mechanical and physical behaviour of waste-glass cement mortar'. Materials and Design, 33 :127-135.
2010 Al-Anazi D, Hashmi MSJ, Yilbas BS (2010) 'High-velocity oxy-fuel thermally sprayed CoNiCrAlY coatings on Ti-6Al-4V alloy: high cycle fatigue properties of coating'. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART A, .
2010 Hashmi M.S.J. (2010) . International Journal Of Mechanical Sciences, 52 :1093-1100.
2010 MSJ Hashmi (2010) 'Characterization and Performance Evaluation of Zinc Oxide Varistor Blocks Processed by Latex Binders'. JOURNAL OF AMERICAN ACADEMY OF BUSINESS, CAMBRIDGE, .
2010 Hasan M, Stokes J, Looney L and Hashmi MSJ (2010) 'Effect of spray parameters on residual stress build-up of HVOF sprayed aluminium/tool-steel functionally graded coatings'. Surface and Coatings Technology, 202 :4006-4010.
2010 Kelleher MC and Hashmi MSJ. (2010) 'The effect of vibratory milling on the powder properties of zinc oxide varistors'. Journal Of Materials Processing Technology, 1-3 :645-650.
2010 Abubakar,T.; Rahman,M.; Dowling,D.P.; Stokes,J.; and Hashmi,M.S.J., (2010) 'Adhesion performance of TiN coating with amorphous NiTi alloy interlayer onto 316L stainless biosteel deposited by sputtering process, Surface Engineering'. 26 :499-505.
2010 Al-Anazi D, Hashmi MSJ, Yilbas BS, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2010) 'High-velocity oxy-fuel thermally sprayed CoNiCrAlY coatings on Ti-6Al-4V alloy: high cycle fatigue properties of coating'. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART A, .
2010 Kelleher MC, Hashmi MSJ (2010) 'The effect of vibratory milling on the powder properties of zinc oxide varistors'. Journal Of Materials Processing Technology, 201 :645-650.
2010 Hasan M, Stokes J, Looney L, et al. (2010) 'Effect of spray parameters on residual stress build-up of HVOF sprayed aluminium/tool-steel functionally graded coatings'. Surface and Coatings Technology, 202 :4006-4010.
2010 Haider,J.; Hashmi,M.S.J. (2010) 'New generation of MoSx based solid lubricant coatings: Recent developments and applications'. 1315 :1365-1370.
2009 Hasan M, Stokes J, Looney L and Hashmi MSJ (2009) 'Deposition and Characterization of HVOF Thermal Sprayed Functionally Graded Coatings Deposited onto a Lightweight Material'. Journal of Materials Engineering and Performance, 18 :66-69.
2009 Morris,E.; Olabi,A.G. and Hashmi,M.S.J. (2009) 'Experimental and numerical analysis of slotted tube systems under quasi-static loading'. 2 :137-145.
2009 Benyounis,K.Y.; Olabi,A.G. and Hashmi,M.S.J. (2009) 'Mechanical properties, weld bead and cost universal approach for CO2 laser welding process optimisation'. :99-109.
2009 Karim, A.N.M.; Begum,S. and Hashmi,M.S.J. (2009) 'Performance and failure during energy testing of zinc oxide varistor processed from different powder size fraction and passivation thickness'. International Journal of Mechanical and Materials Engineering 2 :175-181.
2008 Akter S, Hashmi MSJ, POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2008) 'Polymer flow analysis in a tapered bore coating unit: Combination of shear and extensional flow'. Polymer, 47 :515-523.
2008 Haider J, Rahman M, Hashmi MSJ, et al (2008) 'Investigating the wear characteristics of engineered surfaces: low-temperature plasma nitriding and TiN+MoSx hard-solid lubricant coating'. Journal of Materials Science, 43 :3368-3376.
2008 Hasan M, Stokes J, Looney L, et al. (2008) 'Design and optimisation of a multi-powder feed system for the HVOF deposition process'. Surface and Coatings Technology, 202 :3215-3220.
2008 Olabi AG, Morris E, Hashmi MSJ, et al. (2008) 'Optimised design of nested oblong tube energy absorbers under lateral impact loading'. International Journal of Impact Engineering, 35 :10-26.
2008 Issa A, Brabazon D, Hashmi MSJ (2008) '3D transient thermal modelling of laser microchannel fabrication in lime-soda glass'. Journal Of Materials Processing Technology, .
2008 Abdul-Ghani Olabi , Edmund Morris , Saleem Hashmi , M.D. Gilchrist (2008) 'Optimised design of nested oblong tube energy absorbers under lateral impact loading'. International Journal of Impact Engineering, 35 :10-26.
2008 Khaled Benyounis , Abdul-Ghani Olabi , Saleem Hashmi (2008) 'Multi-response optimization of CO2 laser welding process of austenitic stainless steel'. Optics and Laser Technology, 40 :76-87.
2008 Boudi AA, Hashmi MSJ, Yilbas BS, INDUSTRIAL LUBRICATION AND TRIBOLOGY (2008) 'Fatigue testing of Inconel-625 coatings on carbon and stainless steel after one and three weeks of exposure to aqueous electrolytic solution'. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 60 :24-30.
2008 Olabi AG, Morris E, Hashmi MSJ, et al. (2008) 'Optimised design of nested circular tube energy absorbers under lateral impact loading'. International Journal Of Mechanical Sciences, 50 :104-116.
2007 Ekreem NB, Olabi AG, Prescott T, et al. (2007) 'An overview of magnetostriction, its use and methods to measure these properties'. Journal Of Materials Processing Technology, 191 :96-101.
2007 Rahman M, Duggan P, Dowling DP, et al. (2007) 'Continuously deposited duplex biomedical coatings'. 201 .
2007 Olabi AG, Benyounis KY, Hashmi MSJ (2007) 'Application of response surface methodology in describing the residual stress distribution in CO2 laser welding of AISI304'. 43 :37-46.
2007 Gavin GP, McGuinness GB, Dolan F, et al. (2007) 'Performance characteristics of a therapeutic ultrasound wire waveguide apparatus'. International Journal Of Mechanical Sciences, 49 :298-305.
2007 Abdul-Ghani Olabi , Eddie Morris , Saleem Hashmi (2007) 'Metallic tube type energy absorbers: a synopsis '. Thin-Walled Structures, 45 :706-726.
2007 Rahman M, Reid I, Duggan P, et al. (2007) 'Structural and tribological properties of the plasma nitrided Ti-alloy biomaterials: Influence of the treatment temperature'. Surface and Coatings Technology, 201 :4865-4872.
2007 Morris E, Olabi AG, Hashmi MSJ (2007) 'Lateral crushing of circular and non-circular tube systems under quasi-static conditions'. Journal Of Materials Processing Technology, 191 :132-135.
2007 Olabi AG, Morris E, Hashmi MSJ (2007) 'Metallic tube type energy absorbers: A synopsis'. Thin-Walled Structures, 45 .
2006 Eddie Morris , Abdul-Ghani Olabi , Saleem Hashmi (2006) 'Analysis of nested tube type energy absorbers with different indenters and exterior constraints'. Thin-Walled Structures, 44 :872-885.
2005 Abdul Olabi , Khaled Benyounis , Saleem Hashmi (2005) 'Effect of laser-welding parameters on the heat input and weld-bead profile'. Journal Of Materials Processing Technology, 164-165 :978-985.
2000 Mac Donald BJ Hashmi MSJ (2000) 'Finite element simulation of bulge forming of a cross-joint from a tubular blank'. Journal Of Materials Processing Technology, 103 :333-342.
2000 Yilbas BS Hashmi MSJ (2000) 'Laser treatment of Ti-6A1-4V alloy prior to plasma nitriding'. Journal Of Materials Processing Technology, 103 :304-309.
2000 Galietti U Pappalettere C Hashmi MSJ (2000) 'High velocity oxy-fuel coating technique: evaluation of residual stresses'. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 15 :20-33.
1999 Tan JC Looney L Hashmi MSJ (1999) 'Component repair using HVOF thermal spraying'. Journal Of Materials Processing Technology, 93 :203-208.
1999 Hashim J Looney L Hashmi MSJ (1999) 'Metal matrix composites: production by the stir casting method'. Journal Of Materials Processing Technology, 93 :1-7.
1999 Ismail MY Hashmi MSJ (1999) 'The state of quality management in the Irish manufacturing industry'. Total Quality Management, 10 :853-862.
1999 Ahmed M Hashmi MSJ (1999) 'Finite element simulation of bulge forming of an elbow of box section from circular tube'. Journal Of Materials Processing Technology, 93 :410-418.
1999 Ali ARM Hashmi MSJ (1999) 'Theoretical and experimental results of the elastic-plastic response of a circular rod subjected to non-proportional combined torque and tension loadings'. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART A, 213 :251-261.
1999 Akter S Hashmi MSJ (1999) 'Experimental results of high speed wire coating using a combined hydrodynamic unit'. Journal Of Materials Processing Technology, 93 :224-229.
1999 Akter S Hashmi MSJ (1999) 'Analysis of polymer flow in a conical coating unit: a power law approach'. Progress in Organic Coatings, 37 :15-22.
1999 Chowdhury AKMS Cameron DC Hashmi MSJ (1999) 'Adhesion of carbon nitride thin films on tool steel'. Surface and Coatings Technology, 119 :46-53.
1999 Chowdhury AKMS Cameron DC Hashmi MSJ Gregg JM (1999) 'Evidence for continuous areas of crystalline beta-C3N4 in sputter-deposited thin films'. Journal of Materials Research, 14 :2359-2363.
1999 Murphy MJ Monaghan J Tyrrell M Walsh R Cameron DG Chowdhury AKMS Monclus M Hashmi MSJ (1999) 'Penning type magnetron sputtering source and its use in the production of carbon nitride coatings'. Journal of Vacuum Science & Technology A-Vacuum Surface, 17 :62-69.
1999 Chowdhury AKMS Cameron DC Hashmi MSJ (1999) 'Bonding structure in carbon nitride films: variation with nitrogen content and annealing temperature'. Surface and Coatings Technology, 112 :133-139.
1998 Kennedy DM Hashmi MSJ (1998) 'Methods of wear testing for advanced surface coatings and bulk materials'. Journal Of Materials Processing Technology, 77 :246-253.
1998 Olabi AG Hashmi MSJ (1998) 'Effects of the stress-relief conditions on a martensite stainless-steel welded component'. Journal Of Materials Processing Technology, 77 :216-225.
1998 Yilbas Z Hashmi MSJ (1998) 'Simulation of weight pruning process in backpropagation neural network for pattern classification: A self-running threshold approach'. Computer Methods in Applied Mechanics and Engineering, 166 :233-246.
1998 Hashmi MSJ Pappalettere C Ventola F (1998) 'Residual stresses in structures coated by a high velocity oxy- fuel technique'. Journal Of Materials Processing Technology, 75 :81-86.
1998 Akter S Hashmi MSJ (1998) 'Plasto-hydrodynamic pressure distribution in an exponentially converging coating unit'. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 13 :384-399.
1998 Akter S Hashmi MSJ (1998) 'Modelling of the pressure distribution within a hydrodynamic pressure unit: Effect of the change in viscosity during drawing of wire coating'. Journal Of Materials Processing Technology, 77 :32-36.
1998 Begum S Duff A Puyane R Hashmi MSJ (1998) 'Evaluation of latex binder in the processing of electronic ceramic powder'. Journal Of Materials Processing Technology, 77 :108-114.
1998 Alauddin M Mazid MA El Baradi MA Hashmi MSJ (1998) 'Cutting forces in the end milling of Inconel 718'. Journal Of Materials Processing Technology, 77 :153-159.
1998 Huda D El Baradie MA Hashmi MSJ Puyane R (1998) 'Study of electrical characteristics and microstructure of zinc oxide varistor through rate-controlled sintering'. Journal of Materials Science, 33 :271-278.
1998 Akter S Hashmi MSJ (1998) 'Formation and remelting of a solid polymer layer on the wire in a polymer melt chamber'. Journal Of Materials Processing Technology, 77 :314-318.
1998 Yilbas Z Hashmi MSJ (1998) 'An optical method and neural network for surface roughness measurement'. Optics and Lasers in Engineering, 29 :1-15.
1998 Karim ANM Puyane R El-Baradie MA Hashmi MSJ (1998) 'Holding time in the pressing cycle and its influence on the performance characteristics of zinc oxide varistor discs'. Journal Of Materials Processing Technology, 77 :54-58.
1998 Ahmed M Hashmi MSJ (1998) 'Finite-element analysis of bulge forming applying pressure and in-plane compressive load'. Journal Of Materials Processing Technology, 77 :95-102.
1998 Ismail MY El Baradie M Hashmi MSJ (1998) 'Quality management in the manufacturing industry practice vs performance'. COMPUTERS & INDUSTRIAL ENGINEERING, 35 :519-522.
1998 Chowdhury AKMS Cameron DC Hashmi MSJ (1998) 'Vibrational properties of carbon nitride films by Raman spectroscopy'. Thin Solid Films, 332 :62-68.
1998 Huda MD Puyane R El Baradie MA Hashmi MSJ (1998) 'Failure modelling for ZnO varistors'. Journal Of Materials Processing Technology, 77 :273-277.
1998 Hamouda AMS Hashmi MSJ (1998) 'Testing of composite materials at high rates of strain: advances and challenges'. Journal Of Materials Processing Technology, 77 :327-336.
1998 Nwir MA Hashmi MSJ (1998) 'Hydro-dynamic pressure distribution in tapered stepped parallel bore and complex geometry pressure units: experimental results'. Journal Of Materials Processing Technology, 77 :294-299.
1998 Hashmi MSJ (1998) 'A personal glimpse of the life and works of William Johnson: a researcher of materials processing technology and an engineering educator'. Journal Of Materials Processing Technology, 77 :1-8.
1998 Ismail MY Hashmi MSJ (1998) 'Empirical study into quality initiatives implementation order'. Total Quality Management, 9 :S128-S129.
1997 Kennedy DM Hashmi MSJ (1997) 'The influence of linear velocity on the wear behaviour of thermal sprayed coatings under dynamic abrasion test conditions'. Surface and Coatings Technology, 96 :345-352.
1997 Chowdhury AKMS Monclus M Cameron DC Gilvarry J Murphy MJ Barradas NP Hashmi MSJ (1997) 'The composition and bonding structure of CNx films and their influence on the mechanical properties'. Thin Solid Films, 308 :130-134.
1997 Hashmi MSJ (1997) 'AMPT '96 Dublin City University Dublin Ireland'. International Journal Of Mechanical Sciences, 39 :135-135.
1997 Hamouda AMS Hashmi MSJ (1997) 'High speed impact of elastic-plastic work hardening material into a rigid boundary'. Journal Of Materials Processing Technology, 64 :189-197.
1997 Ahmed M Hashmi MSJ (1997) 'Estimation of machine parameters for hydraulic bulge forming of tubular components'. Journal Of Materials Processing Technology, 64 :9-23.
1997 Akter S Hashmi MSJ (1997) 'High speed nylon coating of wire using a plasto-hydrodynamic pressure unit'. Journal Of Materials Processing Technology, 63 :453-457.
1997 Alauddin M ElBaradie MA Hashmi MSJ (1997) 'Prediction of tool life in end milling by response surface methodology'. Journal Of Materials Processing Technology, 71 :456-465.
1997 Mohammed MA Hashmi MSJ Yilbas BS (1997) 'A study into effects of CO2 laser melting of nitrided Ti-6Al-4V alloy'. Journal of Materials Engineering and Performance, 6 :642-648.
1997 Ahmed M Hashmi MSJ (1997) 'Comparison of free and restrained bulge forming by finite element method simulation'. Journal Of Materials Processing Technology, 63 :651-654.
1996 Murphy MJ Monaghan J Cameron DC Hashmi MSJ (1996) 'Magnetic field in a commercial sputter magnetron'. FRONTIERS FOR ENGINEERING MATERIALS, :287-294.
1996 Alauddin M ElBaradie MA Hashmi MSJ (1996) 'Modelling of cutting force in end milling Inconel 718'. Journal Of Materials Processing Technology, 58 :100-108.
1996 Helali M Hashmi MSJ (1996) 'Production of free standing objects by high velocity oxy-fuel (HVOF) thermal spraying process'. Journal Of Materials Processing Technology, 56 :431-438.
1996 Kola PV Daniels S Cameron DC Hashmi MSJ (1996) 'Magnetron sputtering of TiN protective coatings for medical applications'. Journal Of Materials Processing Technology, 56 :422-430.
1996 Olabi AG Hashmi MSJ (1996) 'The microstructure and mechanical properties of low carbon steel welded components after the application of PWHTs'. Journal Of Materials Processing Technology, 56 :88-97.
1996 Olabi AG Hashmi MSJ (1996) 'Stress relief procedures for low carbon steel(1020) welded components'. Journal Of Materials Processing Technology, 56 :552-562.
1996 Haque MM Hashmi MSJ (1996) 'Investigation on microstructure of medium carbon steel deformed at strain rates of up to 10(5) per second at -30 degrees C to 235 degrees C'. Journal Of Materials Processing Technology, 56 :119-125.
1996 AlTounsi A Puyane R Hashmi MSJ (1996) 'Rate-controlled shrinkage of ZnO varistors'. Journal Of Materials Processing Technology, 56 :891-896.
1996 Kennedy DM Hashmi MSJ (1996) 'Test rig design and experimental results of coated systems under impact abrasion conditions'. Surface and Coatings Technology, :493-497.
1996 Hamouda AMS Hashmi MSJ (1996) 'Mechanical properties of aluminium metal matrix composites under impact loading'. Journal Of Materials Processing Technology, 56 :743-756.
1996 Hashmi MSJ (1996) 'Special issue containing papers presented at AMPT '93 - International Conference on Advances in Material & Processing Technologies held at Dublin City University Dublin Ireland in August 1993 - Preface'. Journal Of Materials Processing Technology, 56 :R15-R15.
1996 Huda D ElBaradie MA Hashmi MSJ (1996) 'Modelling for the compressive strength of Al-6061/SiC MMCs'. Journal Of Materials Processing Technology, 56 :452-462.
1996 Hamouda AMS Hashmi MSJ (1996) 'Modelling the impact and penetration events of modern engineering materials: Characteristics of computer codes and material models'. Journal Of Materials Processing Technology, 56 :847-862.
1996 Hamouda AMS Sulaiman S Hashmi MSJ (1996) 'Fast upsetting of circular cylinders of aluminium metal matrix composites: Experimental results and numerical analysis'. Journal Of Materials Processing Technology, 60 :723-727.
1995 Crombie D Hashmi MSJ (1995) 'Simulation and assessment of the leakage characteristics and suitability of Rhone-Poulenc's 'ISCEON 69' blends as refrigerants'. Journal Of Materials Processing Technology, 55 :315-320.
1995 Olabi AG Hashmi MSJ (1995) 'The effect of post-weld heat-treatment on mechanical-properties and residual-stresses mapping in welded structural steel'. Journal Of Materials Processing Technology, 55 :117-122.
1995 Alauddin M Choudhury IA ElBaradie MA Hashmi MSJ (1995) 'Plastics and their machining: A review'. Journal Of Materials Processing Technology, 54 :40-46.
1995 Alauddin M ElBaradie MA Hashmi MSJ (1995) 'Computer-aided analysis of a surface-roughness model for end milling'. Journal Of Materials Processing Technology, 55 :123-127.
1995 Hashmi MSJ (1995) 'Conference of the Irish Manufacturing Committee on Advanced Manufacturing Technology held at University College Dublin Ireland - Preface'. Journal Of Materials Processing Technology, 55 :R14-R14.
1995 ALTOUNSI A PUYANE R HASHMI MSJ (1995) 'CONTROL OF WEIGHT-LOSS USING CLOSED FEED BACK LOOP DURING THE FIRING PROCESS OF ZNO VARISTORS'. Silicates Industriels, 60 :159-161.
1995 Alauddin M ElBaradie MA Hashmi MSJ (1995) 'Tool-life testing in the end milling of Inconel 718'. Journal Of Materials Processing Technology, 55 :321-330.
1994 HUDA D ELBARADIE MA HASHMI MSJ (1994) 'ANALYTICAL STUDY FOR THE STRESS-ANALYSIS OF METAL-MATRIX COMPOSITES'. Journal Of Materials Processing Technology, 45 :429-434.
1994 HU W HASHMI MSJ LIU P (1994) 'STUDY OF METAL FLOW IN EXTRUSION FORGING OF RECTANGULAR BILLETS'. Journal Of Materials Processing Technology, 43 :51-59.
1994 HASHMI MSJ HAMOUDA AMS (1994) 'DEVELOPMENT OF A ONE-DIMENSIONAL CONSTITUTIVE EQUATION FOR METALS SUBJECTED TO HIGH-STRAIN RATE AND LARGE-STRAIN'. Journal of Strain Analysis for Engineering Design, 29 :117-127.
1994 HUDA D ELBARADIE MA HASHMI MSJ (1994) 'DEVELOPMENT OF A HARDNESS MODEL FOR MMCS (AL/AL2O3)'. Journal Of Materials Processing Technology, 44 :81-90.
1994 KARIM MZ CAMERON DC HASHMI MSJ (1994) 'PLASMA DIAGNOSTICS IN THE GROWTH OF C-BN FILMS'. Diamond and Related Materials, 3 :551-554.
1994 HASHMI MSJ (1994) '8TH CONFERENCE OF THE IRISH-MANUFACTURING-COMMITTEE-ON- ADVANCED-MANUFACTURING-TECHNOLOGY - UNIVERSITY-OF-ULSTER NORTHERN-IRELAND - PREFACE'. Journal Of Materials Processing Technology, 43 :R7-R7.
1994 KOLA PV CAMERON DC HASHMI MSJ (1994) 'MAGNETRON-SPUTTERED CARBON NITRIDE FILMS'. Surface and Coatings Technology, 68 :188-193.
1994 KENNEDY DM HELALI M HASHMI MSJ (1994) 'DYNAMIC ABRASION RESISTANCE OF COATINGS APPLIED TO ENGINEERING MATERIALS'. Surface and Coatings Technology, 68 :477-481.
1993 ALTOUNSI A PUYANE R HASHMI MSJ (1993) 'COMPACTION OF ALLGOMERATED ZINC-OXIDE POWDER'. Journal Of Materials Processing Technology, 37 :543-550.
1993 DIKO F HASHMI MSJ (1993) 'A FINITE-ELEMENT SIMULATION OF NON-STEADY-STATE METAL-FORMING PROCESSES'. Journal Of Materials Processing Technology, 38 :115-122.
1993 KARIM MZ CAMERON DC HASHMI MSJ (1993) 'CHARACTERIZATION OF MIXED-PHASE BN THIN-FILMS DEPOSITED BY PLASMA CVD'. Surface and Coatings Technology, 60 :502-505.
1993 OLABI AG HASHMI MSJ (1993) 'EFFECTS OF POST-WELD HEAT-TREATMENT SOAKING TEMPERATURE ON THE MECHANICAL-PROPERTIES AND RESIDUAL-STRESSES OF A MARTENSITE STAINLESS-STEEL WELDED COMPONENT'. Journal Of Materials Processing Technology, 38 :387-398.
1993 CAMERON DC KARIM MZ HASHMI MSJ (1993) 'PROPERTIES OF MIXED-PHASE BN FILMS DEPOSITED BY RF PACVD'. Thin Solid Films, 236 :96-102.
1993 ZHANG JY HU WP HASHMI MSJ (1993) 'SUPER-SUBCOOLING WITH R12 AND R22 REFRIGERATION PLANTS USING RECIPROCATING-COMPRESSORS'. Applied Energy, 45 :157-166.
1993 ALTOUNSI A HASHMI MSJ (1993) 'EFFECT OF SINTERING TEMPERATURE ON THE DENSIFICATION SHRINKAGE AND COMPRESSIVE STRENGTH OF STAINLESS-STEEL 300 SERIES'. Journal Of Materials Processing Technology, 37 :551-557.
1993 HUDA D ELBARADIE MA HASHMI MSJ (1993) 'METAL-MATRIX COMPOSITES - MATERIALS ASPECTS .2'. Journal Of Materials Processing Technology, 37 :529-541.
1993 HUDA D ELBARADIE MA HASHMI MSJ (1993) 'METAL-MATRIX COMPOSITES - MANUFACTURING ASPECTS .1'. Journal Of Materials Processing Technology, 37 :513-528.
1992 HASHMI MSJ (1992) 'PLASMA COATING OF SURFACES AND HOW TO ASSESS AND AVOID DEFECTS'. Journal Of Materials Processing Technology, 32 :407-419.
1992 FLEMING MG HASHMI MSJ (1992) 'A COMPARISON OF MAGNETRON SPUTTERED AND ARC EVAPORATED PVD THIN-FILMS FOR WEAR APPLICATIONS IN MULTIPOINT CUTTING TOOLS'. Journal Of Materials Processing Technology, 32 :481-488.
1992 HASHMI MSJ (1992) 'SPECIAL ISSUE - 7TH CONFERENCE OF THE IRISH-MANUFACTURING- COMMITTEE-ON-ADVANCED-MANUFACTURING-TECHNOLOGY - DUBLIN IRELAND AUGUST 29-31 1990 - PREFACE'. Journal Of Materials Processing Technology, 33 :R3-R3.
1992 KARIM MZ CAMERON DC HASHMI MSJ (1992) 'EFFECT OF DEPOSITION PARAMETERS ON THE FORMATION OF CUBIC BN FILMS DEPOSITED BY PLASMA-ASSISTED CHEMICAL VAPOR-DEPOSITION FROM NONTOXIC MATERIAL'. Surface and Coatings Technology, 55 :355-359.
1992 AHERN M HASHMI MSJ (1992) 'COMPARISON OF OPERATING-CONDITIONS AND TIN FILMS PRODUCED FROM BOTH DIRECTLY AND INDIRECTLY COOLED DC MAGNETRON TARGETS'. Surface and Coatings Technology, 50 :249-254.
1992 TUNIO MA HASHMI MSJ (1992) 'FEASIBILITY OF MANUFACTURING POLYMER-COATED COMPOSITE WIRE ROPES USING PLASTOHYDRODYNAMIC TECHNIQUE'. Journal Of Materials Processing Technology, 33 :367-374.
1992 AHERN MJ HASHMI MSJ (1992) 'THE ROLE OF DEPOSITION PARAMETERS AND ADHESION EFFECTS ON THE FORMATION OF TIN FILMS ON HIGH-SPEED STEEL'. Journal Of Materials Processing Technology, 31 :349-361.
1992 BHATTI MT HASHMI MSJ (1992) 'SIMULATION OF A MICRO-COMPUTER-CONTROLLED ROBOTIC HAND FOR WIRE ELECTRODISCHARGE MACHINING APPLICATIONS'. Journal Of Materials Processing Technology, 33 :383-396.
1992 HU W HASHMI MSJ (1992) 'THE EFFECT OF THE PROPERTIES OF THE MATERIAL ON THE PLANE- STRAIN DEFORMATION OF RECTANGULAR BILLETS BETWEEN GROOVED AND FLAT PLATENS'. Journal Of Materials Processing Technology, 33 :419-428.
1991 ALTOUNSI A HASHMI MSJ (1991) 'EFFECT OF SINTERING TEMPERATURE ON HIGH-STRAIN RATE PROPERTIES OF IRON-POWDER COMPACTS'. 1 :203-208.
1991 HASHMI MSJ (1991) '6TH CONFERENCE OF THE IRISH-MANUFACTURING-COMMITTEE ON ADVANCED MANUFACTURING TECHNOLOGY - DUBLIN IRELAND AUGUST 31 SEPTEMBER 1 1989 - PREFACE'. Journal Of Materials Processing Technology, 26 :95-95.
1991 LAMB RE HASHMI MSJ (1991) 'POLYMER COATING OF SUPERFINE WIRE - A NEW TECHNIQUE TO ENSURE QUALITY'. Journal Of Materials Processing Technology, 26 :197-205.
1991 KARIM MZ CAMERON DC MURPHY MJ HASHMI MSJ (1991) 'PLASMA DEPOSITION OF CUBIC BORON-NITRIDE FILMS FROM NONTOXIC MATERIAL AT LOW-TEMPERATURES'. Surface and Coatings Technology, 49 :416-421.
1990 HASHMI MSJ (1990) 'THEORY AND EXPERIMENT ON PLANE-STRAIN DEFORMATION OF RECTANGULAR BILLETS BETWEEN FLAT AND GROOVED PLATENS'. Journal Of Materials Processing Technology, 24 :13-22.
1990 BHATTI MT HASHMI MSJ (1990) 'SOFTWARE AND HARDWARE DESIGN OF A ROBOTIC MANIPULATOR FOR THE MANUFACTURE OF COMPLEX SHAPED DIES'. Journal Of Materials Processing Technology, 24 :473-483.

Book Chapter

Year Publication
2014 Hashmi, S (2014) 'COMPREHENSIVE MATERIALS PROCESSING PREFACE' In: Comprehensive Materials Processing, Vol 1: Assessing Properties Of Conventional And Specialized Materials. NEW YORK : ELSEVIER.

Conference Publication

Year Publication
2013 Abdurrahim A.;Betts A.;Naher S.;Hashmi S. (2013) EUROCORR 2013 - European Corrosion Congress Corrosion behaviour and microstructural study of low carbon steel weldment within aqueous solution containing CO2
2004 Walsh, G;Esmonde, H;Hashmi, S (2004) SMART STRUCTURES AND MATERIALS 2004: MODELING, SIGNAL PROCESSING, AND CONTROL Simple techniques for the identification and control of semi-active dampers

Editorial

Year Publication
2014 Hashmi S. (2014) Preface. ED
2006 Hashmi, S (2006) The Journal of Materials Processing Technology in year 2005 and beyond: What the authors and reviewers should know. LAUSANNE: ED
Certain data included herein are derived from the © Web of Science (2021) of Clarivate. All rights reserved.

Professional Associations

Association Function From / To
UK and Ireland Chartered Engineer -
Institute of Mechanical Engineering, U.K. Fellow -
American Society of Mechanical Engineers Member -
Institution of Engineers of Ireland Fellow -